Touch Display calibration on Cybex 770T/790T
Posted: April 1st, 2019, 8:59 am
To access menu do one of the following:
CYBEX LOGO Press and hold Cybex logo for 6 seconds to access Screen Lock and Toolbox.
LANGUAGE ICON Press and hold language logo for 6 seconds to access Screen Lock and Toolbox.
1. Tap the Access Toolbox icon to display the Access to Toolbox login screen.
2. Enter the sequence:
3. Tap the Setup icon to display the Setup menu.
4. Tap the A/V Config icon to display the A/V configuration options.
Touch Calibration Tap Cybex GO monitor in nine locations to calibrate screen.
Exit Diagnostics by tapping the Toolbox icon, then tap the Home icon . The screen will refresh.
CYBEX LOGO Press and hold Cybex logo for 6 seconds to access Screen Lock and Toolbox.
LANGUAGE ICON Press and hold language logo for 6 seconds to access Screen Lock and Toolbox.
1. Tap the Access Toolbox icon to display the Access to Toolbox login screen.
2. Enter the sequence:
3. Tap the Setup icon to display the Setup menu.
4. Tap the A/V Config icon to display the A/V configuration options.
Touch Calibration Tap Cybex GO monitor in nine locations to calibrate screen.
Exit Diagnostics by tapping the Toolbox icon, then tap the Home icon . The screen will refresh.